Specification sheetIssued 20 November 2026
Hyundai · excavator
Hyundai R170W-9
Hyundai R170W-9 (Robex 170W-9, sold as the HW170 / R170W series wheeled excavator; Cummins QSB 6.7, Tier 3), figures from Hyundai's R170W-9 brochure (copy hosted by the Hespareparts parts dealer) for the 5.1 m mono boom, 2.2 m arm, 0.76 m3 bucket, 10.00-20 dual tyres and rear dozer blade. The newer HW170A CR (Stage V) is a separate model and is not covered.
UAEGlobal
- digging depth
- 17' 9"
- power
- 153 HP
- Operating weight
- 38,140 lb
- Bucket capacity
- 0.99 yd3
10.5 ft28.4 ft
8.2 ftDimensions
- Overall width of upperstructure (Read off the undercarriage drawing)
- 8' 1"
- Wheelbase
- 8' 6"
- Tread
- 6' 3"
- Overall length of undercarriage (Rear dozer and front rest)
- 15' 4"
- Tail swing radius (Read off the undercarriage drawing (swing centre to rear))
- 8' 2"
- Ground clearance, counterweight (Read off the undercarriage drawing)
- 4' 2"
- Ground clearance (minimum) (Read off the undercarriage drawing)
- 1' 1"
Working range
- AMax digging reach (5.1 m mono boom, 2.2 m arm; 9.02 / 9.45 m with 2.6 / 3.1 m arm)
- 28' 6"
- A'Max reach at ground level (8.81 / 9.25 m with 2.6 / 3.1 m arm)
- 27' 10"
- BMax digging depth (5.82 / 6.32 m with 2.6 / 3.1 m arm)
- 17' 9"
- B'Max digging depth (8' level) (5.62 / 6.13 m with 2.6 / 3.1 m arm)
- 17' 1"
- CMax vertical wall digging depth (5.14 / 5.47 m with 2.6 / 3.1 m arm)
- 16' 1"
- DMax digging height (9.07 / 9.22 m with 2.6 / 3.1 m arm)
- 29' 6"
- EMax dumping height (6.46 / 6.62 m with 2.6 / 3.1 m arm)
- 20' 10"
- FMin swing radius (3.17 / 3.16 m with 2.6 / 3.1 m arm)
- 10' 5"
Weight
- Operating weight (Rear dozer blade, 5.1 m mono boom, 2.2 m arm, 0.76 m3 bucket, lubricants, coolant, full fuel. Rear outrigger 17,450 kg; front outrigger and rear blade 18,420 kg; front blade and rear outrigger 18,360 kg; four outriggers 18,600 kg. Hydraulic adjustable boom: 17,770 / 17,920 / 18,890 / 18,830 / 19,070 kg)
- 38,140 lb
- Counterweight
- 5,840 lb
- Upperstructure weight
- 10,120 lb
- Boom weight (5.1 m mono boom incl. arm cylinder, piping and pin; hydraulic adjustable boom 1,780 kg (3,920 lb))
- 2,730 lb
- Arm weight (2.2 m arm incl. bucket cylinder, linkage and pin; 2.6 m 810 kg, 3.1 m 890 kg)
- 1,560 lb
- Bucket weight (0.76 m3 bucket, 1,060 mm wide (1,180 mm with side cutters))
- 1,260 lb
Performance
- Bucket capacity (SAE heaped, standard bucket; the brochure lists buckets from 0.39 to 1.05 m3)
- 0.99 yd3
- Bucket digging force (ISO; 134.2 kN (30,160 lbf) with power boost. SAE 107.9 kN (24,250 lbf), 117.2 kN with power boost)
- 27,780 lbf
- Arm digging force (ISO crowd force, 2.2 m arm; 98.8 kN with power boost. SAE 87.2 kN (19,600 lbf). 2.6 m arm 80.3 kN ISO, 3.1 m arm 71.4 kN ISO)
- 20,460 lbf
- Swing speed
- 11 rpm
- Top speed (2nd gear)
- 22.4 mph
- Travel speed, 1st
- 6.2 mph
- Max drawbar pull
- 18,740 lbf
- Gradeability (70%)
- 35°
- Min turning radius
- 20' 8"
Engine
- Engine model
- Cummins QSB 6.7
- Emissions (brochure: Cummins Tier III QSB6.7)
- US EPA Tier 3
- Cylinders
- 6, in-line, direct injection, turbocharged and charge-air cooled, low emission
- Displacement
- 409 in3
- Gross power (SAE J1995, at 2,100 rpm; 165 PS DIN 6271/1)
- 163 HP
- Net power (SAE J1349, at 2,100 rpm; 155 PS DIN 6271/1)
- 153 HP
- Max torque (Printed as 74.7 kgf.m at 1,400 rpm)
- 540 lbf-ft
- Bore
- 4.21 in
- Stroke
- 4.88 in
- Batteries
- 2 x 12 V, 100 Ah
- Starting motor
- 24 V, 4.5 kW
- Alternator
- 24 V, 70 A
Hydraulics
- Pump flow (Two variable-displacement piston pumps, cross-sensing and fuel-saving pump system; gear pilot pump)
- 2 x 168 L/min
- Max pressure (Implement circuits; printed as 350 kgf/cm2)
- 4,970 psi
- Max pressure, travel (Printed as 380 kgf/cm2)
- 5,400 psi
- Max pressure, power boost (Boom, arm and bucket; printed as 380 kgf/cm2)
- 5,400 psi
- Swing circuit pressure (Printed as 285 kgf/cm2)
- 4,050 psi
- Pilot circuit pressure (Printed as 40 kgf/cm2)
- 570 psi
- Boom cylinders (2)
- 115 mm bore x 1,090 mm stroke
- Arm cylinder
- 120 mm bore x 1,355 mm stroke
- Bucket cylinder
- 110 mm bore x 995 mm stroke
- Blade cylinders (2)
- 110 mm bore x 235 mm stroke
- Outrigger cylinders (2)
- 125 mm bore x 475 mm stroke
- 2-piece boom cylinders (2)
- 115 mm bore x 960 mm stroke
- Boom adjust cylinder
- 160 mm bore x 650 mm stroke
Transmission
- Transmission
- 4-wheel hydrostatic drive, constant-mesh helical gear transmission, 2 forward and reverse speeds
- Travel motor
- Two-speed axial piston motor with brake valve and parking brake
- Axles
- Full-floating front axle on a centre pin with oscillation lock cylinders; fixed rear axle
- Service brake
- Independent dual brake, front and rear axle, full hydraulic power brake
- Parking brake
- Spring-released, hydraulically applied wet multi-disc brake; transmission locks in neutral
- Steering
- Hydraulic orbitrol steering on the front wheels
Tyres
- Tyres (Optional 10.00-20 dual solid; the standard-equipment list shows 9.00-20-14PR dual tyres)
- 10.00-20-14PR dual (tube type)
Undercarriage
- Undercarriage
- Reinforced box-section frame, all-welded; pin-on dozer blade and outriggers
- Swing motor
- Two fixed-displacement axial piston motors, planetary reduction, grease-bathed bearing; multi-disc pin-lock swing brake optional
Service capacities
- Fuel tank
- 71.3 US gal
- Cooling system (Engine coolant)
- 5.2 US gal
- Engine oil
- 6.3 US gal
- Swing device (Gear oil)
- 0.7 US gal
- Axle oil, front
- 4.1 US gal
- Axle oil, rear
- 5.3 US gal
- Hydraulic system, with tank
- 55.5 US gal
- Hydraulic tank
- 32.8 US gal