Hyundai HW140
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Hyundai · excavator

Hyundai HW140

HD Hyundai HW140 (the R140W-9 series wheeled excavator, Tier 4 Final / Stage IV build with the Cummins QSB 6.7), figures from the HW140 catalogue for the 4.6 m mono boom, 2.1 m arm, 0.58 m3 bucket, 9.00-20 dual tyres and rear dozer blade. The newer HW140A (Stage V, 127 kW net, 14,900 kg with mono boom) is a separate model and is not covered.

UAEGlobal

digging depth
15' 11"
power
149 HP
Operating weight
30,600 lb
Bucket capacity
0.76 yd3
Hyundai HW140, side view with dimensions (illustration)10.3 ft25.7 ft
Hyundai HW140, front view (illustration)8.2 ft

Dimensions

Overall width of upperstructure (Read off the undercarriage drawing)
8' 1"
Wheelbase (Read off the undercarriage drawing (rear dozer))
8' 6"
Tread (Read off the undercarriage drawing)
6' 5"
Tail swing radius (Read off the undercarriage drawing)
7' 8"
Ground clearance, counterweight (Read off the undercarriage drawing)
4' 0"
Overall length of undercarriage (With rear dozer blade; read off the drawing)
13' 6"

Working range

AMax digging reach (4.6 m mono boom, 2.1 m arm; 7.75 / 8.32 / 8.78 m with 1.9 / 2.5 / 3.0 m arm)
26' 0"
A'Max reach at ground level (7.53 / 8.12 / 8.59 m with 1.9 / 2.5 / 3.0 m arm)
25' 3"
BMax digging depth (4.65 / 5.25 / 5.75 m with 1.9 / 2.5 / 3.0 m arm)
15' 11"
B'Max digging depth (8' level) (4.39 / 5.04 / 5.57 m with 1.9 / 2.5 / 3.0 m arm)
15' 1"
CMax vertical wall digging depth (4.35 / 5.03 / 5.55 m with 1.9 / 2.5 / 3.0 m arm)
14' 8"
DMax digging height (8.40 / 8.79 / 9.07 m with 1.9 / 2.5 / 3.0 m arm)
27' 9"
EMax dumping height (5.96 / 6.35 / 6.62 m with 1.9 / 2.5 / 3.0 m arm)
19' 10"
FMin swing radius (2.62 / 2.65 / 2.67 m with 1.9 / 2.5 / 3.0 m arm)
8' 10"

Weight

Operating weight (Rear dozer blade; with 4.6 m mono boom, 2.1 m arm, 0.58 m3 backhoe bucket, full fluids. Rear outrigger 14,280 kg; front outrigger and rear blade 14,880 kg; front blade and rear outrigger 14,880 kg; four outriggers 14,630 kg)
30,600 lb
Counterweight (From the lifting-capacity chart header)
3,750 lb
Arm weight (2.1 m arm incl. bucket cylinder, linkage and pin; 1.9 m 560 kg, 2.5 m 610 kg, 3.0 m 670 kg)
1,280 lb
Bucket weight (0.58 m3 bucket, 1,000 mm wide (1,100 mm with side cutters))
1,060 lb

Performance

Bucket capacity (SAE heaped, standard bucket; the catalogue lists buckets from 0.23 to 0.71 m3)
0.76 yd3
Bucket digging force (ISO; 110.8 kN (24,890 lbf) with power boost. SAE 87.3 kN (19,620 lbf), 94.8 kN with power boost)
22,930 lbf
Arm digging force (ISO crowd force, 2.1 m arm; 84.1 kN with power boost. SAE 73.6 kN (16,530 lbf))
17,420 lbf
Swing speed
11.6 rpm
Top speed (2nd gear; 36 km/h with the 2-piece boom, 20 km/h with the optional speed limiter)
24.1 mph
Travel speed, 1st
6.2 mph
Max drawbar pull
17,200 lbf
Gradeability (70%)
35°
Min turning radius
20' 8"

Engine

Engine model
Cummins QSB 6.7
Emissions
EU Stage IV / US EPA Tier 4 Final
Cylinders
6, in-line, direct injection, turbocharged and charge-air cooled
Displacement
409 in3
Gross power (SAE J1995, at 2,150 rpm; 159 PS DIN 6271/1)
157 HP
Net power (SAE J1349, at 2,150 rpm; 151 PS DIN 6271/1)
149 HP
Max torque (Printed as 68.5 kgf.m at 1,500 rpm)
496 lbf-ft
Bore
4.21 in
Stroke
4.88 in
Batteries
2 x 12 V, 100 Ah
Starting motor
24 V, 4.8 kW
Alternator
24 V, 95 A

Hydraulics

Pump flow (Two variable-displacement piston pumps, cross-sensing and fuel-saving pump system; gear pilot pump)
2 x 172 L/min
Max pressure (Implement circuits; printed as 350 kgf/cm2)
4,970 psi
Max pressure, travel (Printed as 380 kgf/cm2)
5,400 psi
Max pressure, power boost (Boom, arm and bucket; printed as 380 kgf/cm2)
5,400 psi
Swing circuit pressure (Printed as 285 kgf/cm2)
4,050 psi
Pilot circuit pressure (Printed as 40 kgf/cm2)
570 psi
Boom cylinders (2)
105 mm bore x 1,075 mm stroke
Arm cylinder
115 mm bore x 1,138 mm stroke
Bucket cylinder
100 mm bore x 850 mm stroke
Blade cylinders (2)
100 mm bore x 236 mm stroke
Outrigger cylinders (2)
110 mm bore x 446 mm stroke
2-piece boom cylinders (2)
105 mm bore x 975 mm stroke
Boom adjust cylinder
145 mm bore x 613 mm stroke

Transmission

Transmission
4-wheel hydrostatic drive, constant-mesh helical gear transmission, 2 forward and reverse speeds
Travel motor
Bent-axis piston motor with brake valve and parking brake
Axles
Full-floating front axle on a centre pin with oscillation lock cylinders; fixed rear axle
Service brake
Independent dual brake, front and rear axle, full hydraulic power brake
Parking brake
Spring-applied, hydraulically released wet disc brake in the transmission
Steering
Hydraulic orbitrol steering on the front wheels

Tyres

Tyres (Optional 9.00-20 dual solid; 10.00-20-14PR dual (tube type))
9.00-20-14PR dual (tube type)

Undercarriage

Undercarriage
Reinforced box-section frame, all-welded; pin-on dozer blade and outriggers, mountable front or rear
Swing motor
Fixed-displacement axial piston motor, planetary reduction, grease-bathed bearing; multi-disc swing brake optional

Service capacities

Fuel tank
71.3 US gal
Cooling system (Engine coolant)
5.2 US gal
Engine oil
6.3 US gal
Swing device (2.5 L option)
0.92 US gal
Axle oil, front
3.6 US gal
Axle oil, rear
4.3 US gal
Transmission
0.7 US gal
Hydraulic system, with tank
55.5 US gal
Hydraulic tank
31.7 US gal
DEF tank (DEF / AdBlue)
7.1 US gal