Specification sheetIssued 20 November 2026
Hino · truck
Hino 500
Hino 500 Series FG8JKLB (FG) 4x2 rigid truck chassis, 4,600 mm wheelbase, J08E Euro II, 18,000 kg GVW, from the Hino Motors Pakistan chassis specification sheet (MKT-PP-FG8J-Truck(FA)-20210113). Hino Middle East does not publish a spec sheet; the Gulf FG/FM use the same J08E-based chassis. The Kenyan and New Zealand sheets are listed under Other variants.
UAEGlobal
- power
- 240 PS @ 2,500 rpm
- torque
- 535 lb-ft @ 1,500 rpm
- Wheelbase
- 15 ft 1.1 in
8.7 ft15.1 ft26.3 ft
8 ftDimensions
- Road clearance (at the differential case)
- 10 in
- Turning radius (on the tyre)
- 26 ft 3 in
- Bumper to back of cab (derived: front overhang 1,235 + (wheelbase 4,600 - cab to axle 3,795) = 2,040 mm)
- 6.7 ft
- Front axle to back of cab (derived: wheelbase minus cab to axle (4,600 - 3,795 mm))
- 2.6 ft
Engine
- Engine model
- Hino J08E (Euro II), 6-cylinder in-line, turbocharged and intercooled, 4-stroke, overhead camshaft, water-cooled, direct injection
- Emissions
- Euro II
- Displacement
- 2 US gal
- Gross power (kW is a conversion; the sheet does not state the rating standard)
- 240 PS @ 2,500 rpm
- Max torque (Nm is a conversion; printed as 74.0 kgf-m)
- 535 lb-ft @ 1,500 rpm
- Cold start device
- Equipped
- Alternator
- 24 V, 60 A
- Batteries
- Two 12 V, 120 Ah (20-hour rate), series connection
Transmission
- Gearbox
- MF06S, 6 forward speeds and 1 reverse, direct drive, synchromesh 2nd-6th, mechanical control with power shift
- Gear ratios
- 1st 8.189, 2nd 5.340, 3rd 3.076, 4th 1.936, 5th 1.341, 6th 1.000, reverse 7.142
- Clutch
- Dry single plate with damper springs, hydraulic control with air booster, 380 mm
- Rear axle ratio
- 5.857 (SH17)
- Top speed
- 58.4 mph
- Max gradeability
- 37.7 % (tan) at rated GVW
Weight
- Gross vehicle weight (Kenyan FG 500 sheet: 16,000 kg; NZ FG 1628: 16,000 kg)
- 39,683 lb
- Kerb weight (chassis only, approximate)
- 11,971 lb
- Front axle load (kerb)
- 6,526 lb
- Rear axle load (kerb)
- 5,445 lb
- Front axle capacity (reverse Elliot I-section beam)
- 13,228 lb
- Rear axle capacity (full-floating, single reduction hypoid)
- 26,455 lb
Chassis
- Service brakes
- Full air, S-cam, leading and trailing shoes, dual circuit with ABS
- Exhaust brake
- Electro-pneumatic
- Steering
- Telescopic and tilt column, recirculating ball, integral power steering
- Front suspension
- Semi-elliptic leaf springs with shock absorbers
- Rear suspension
- Semi-elliptic main and auxiliary leaf springs
- Frame
- Ladder-shaped, channel section
- Cab
- All-steel welded, torsion bar tilt, reinforced with door impact beams; three seats
Tyres
- Tyres
- 10.00-20-16PR, 7 fitted including one spare
- Wheels
- 10-stud ISO disc wheels, 7.5T x 20, offset 162 mm
Service capacities
- Fuel tank
- 105.7 US gal
Other variants
- FG 500 Kenya (FG8JM1A-JG4)
- GVW 16,000 kg, tare 5,325 kg, wheelbase 5,080 mm, overall length 8,835 mm, width 2,490 mm, height 2,750 mm, J08E-WF Euro IV 177 kW / 716 Nm, 6-speed MX06, 11R22.5, 200 L fuel
- FG 1628 New Zealand
- GVM 16,000 kg, J08E-WA Euro 5 7.687 L 206 kW (280 hp) @ 2,500 rpm / 883 Nm @ 1,500 rpm, Eaton ES11109 9-speed, 275/70R22.5, 200 L fuel, 59 L AdBlue