Specification sheetIssued 20 November 2026
Hino · truck
Hino 300
Hino 300 Series (Dutro) XZU730R-WKFTK3 4x2 truck chassis, 4,200 mm wheelbase, N04C-WG Euro 3, from the Hino Motors Pakistan one-page specification (MKT-PP-DUTRO XYZ730R-WKFTK3-20251301-001). Hino Middle East does not publish a 300 Series spec sheet, and this Hinopak sheet prints no GVW for the truck.
UAEGlobal
- power
- 139 PS @ 2,500 rpm (JIS)
- torque
- 291 lb-ft @ 1,600 rpm
- Wheelbase
- 13 ft 9.4 in
7.4 ft13.8 ft23.8 ft
6.7 ftDimensions
- Road clearance
- 7.9 in
- Turning radius (on the tyre)
- 24 ft 3.3 in
- Bumper to back of cab (derived: front overhang 1,115 + (wheelbase 4,200 - cab to axle 3,645) = 1,670 mm)
- 5.5 ft
- Front axle to back of cab (derived: wheelbase minus cab to axle (4,200 - 3,645 mm))
- 1.8 ft
Engine
- Engine model
- Hino N04C-WG (Euro 3), 4-cylinder in-line, turbocharged and intercooled, 4-stroke, overhead valve, water-cooled, direct injection
- Emissions
- Euro 3
- Displacement
- 1.1 US gal
- Gross power (kW is a conversion of the maker's PS figure)
- 139 PS @ 2,500 rpm (JIS)
- Max torque (Nm is a conversion; printed as 40.2 kgf-m (JIS))
- 291 lb-ft @ 1,600 rpm
- Alternator
- 24 V, 60 A
- Batteries
- Two 12 V, 65 Ah (20-hour rate), series connection
Transmission
- Gearbox
- RE61, 6-speed manual with overdrive
- Gear ratios
- 1st 6.370, 2nd 3.870, 3rd 1.913, 4th 1.461, 5th 1.000, 6th 0.703, reverse 5.926
- Clutch
- Dry single plate, diaphragm type with damper springs, 300 mm
- Rear axle ratio
- 5.571
- Top speed
- 71.5 mph
- Max gradeability
- 42.5 % (tan)
Weight
- Kerb weight (chassis only)
- 5,732 lb
- Front axle load (kerb)
- 3,638 lb
- Rear axle load (kerb)
- 2,094 lb
Chassis
- Service brakes
- Dual-circuit hydraulic with vacuum assist and automatic brake shoe adjusters, ABS
- Parking brake
- Mechanical, internal expanding, acting on the transmission output shaft
- Exhaust brake
- Electro-vacuum actuator
- Steering
- Telescopic and tilt column, recirculating ball, hydraulic power steering
- Front axle
- Reverse Elliot I-section beam
- Rear axle
- Full-floating, single reduction, single speed hypoid
- Front suspension
- Semi-elliptic leaf springs with double-acting shock absorbers
- Rear suspension
- Semi-elliptic main and auxiliary leaf springs with double-acting shock absorbers
- Frame
- Ladder-shaped, channel section side rails
- Cab
- Forward control, all-steel welded, high roof; three seats, driver SRS airbag, 3-point ELR seat belt with pre-tensioner, air conditioning, centralised power door lock, headlamp levelling
Tyres
- Tyres
- 7.50-R16-14PR radial, 7 fitted including one spare
- Wheels
- 6-stud disc wheels, 16 x 6.00GS
Service capacities
- Fuel tank
- 26.4 US gal
Other variants
- XZU730R bus chassis
- GVW 7,500 kg, wheelbase 4,200 mm, overall length 7,260 mm, width 1,990 mm, road clearance 195 mm, turning radius 7,600 mm, N04C Euro III 154 PS @ 2,800 rpm / 43.1 kgf-m @ 1,400 rpm, rear axle ratio 4.875, 325 mm clutch, 7.50-16-14PR, 100 L fuel