Heli CPCD100
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Heli · forklift

Heli CPCD100

Heli CPCD100 from the G3 series 5-10 t internal combustion counterbalanced range (code W2G3, Isuzu 6BG1 engine, 10,000 kg at 600 mm, standard M300 two-stage mast, 9.00-20 pneumatic tyres), per Heli's catalogue FIC(G3)011 EN (Nov 2025). Quanchai and Cummins engine versions are the QCG3 and CU2G3 configurations.

UAEGlobal

Rated capacity
10,000 kg
Operating weight
12,500 kg
Heli CPCD100, side view with dimensions (illustration)2.78 m5.42 m
Heli CPCD100, front view (illustration)2.17 m

Dimensions

Fork length (From fork size)
1.22 m
Rear overhang (Calculated: L2 - x - y)
0.725 m

Performance

Rated capacity (At 600 mm load centre; 10,000 kg holds up to 4.25 m lift on the standard mast, 9,400 kg at 5.0 m)
10,000 kg
Load centre
0.6 m
Travel speed (Isuzu 6BG1 truck; 27/30 with the Quanchai engine, 26/30 with the Cummins engine)
29 km/h laden / 31 km/h unladen
Lift speed
330 mm/s laden / 350 mm/s unladen
Lowering speed (Heli: without load 300 or more, with full load 600 or less)
300 mm/s unladen minimum / 600 mm/s laden maximum
Drawbar pull (max, full load)
62 kN
Gradeability
20% laden / 20% unladen
Driving mode (Sit-down operator)
Seat-type

Weight

Operating weight (Service weight, Isuzu engine, standard mast; the mast table (p.8) gives 12,800 kg for the M300 mast)
12,500 kg

Engine

Engine model
Isuzu 6BG1 (W2G3), 6-cylinder diesel
Rated power (At 2,000 rpm, as listed by Heli)
82 kW (110 hp)
Max torque (At 1,400-1,600 rpm)
415 Nm
Cylinders
6, bore x stroke 105 x 125 mm
Displacement
6.5 L
Engine option (QCG3)
Quanchai 4J1-115C32, 4-cyl 4.3 L, 85 kW at 2,200 rpm, 500 Nm at 1,600 rpm (bore x stroke 105 x 124 mm)
Engine option (CU2G3)
Cummins QSF3.8, 4-cyl 3.8 L, 86 kW at 2,200 rpm, 470 Nm at 1,100-1,700 rpm (bore x stroke 102 x 115 mm)
Battery
2 x 12 V / 80 Ah
Rated speed
2,000 rpm

Transmission

Transmission (Heli-built transmission box)
Hydraulic transmission, electro-hydraulic directional change, 2 forward / 2 reverse
Service brake
Powered brake pedal; wet-type drive axle brake with forced oil cooling radiator
Parking brake
Mechanical hand brake lever
Drive (Dual front tyres)
Front-wheel drive, 4 front (driven) / 2 rear wheels

Hydraulics

Max pressure (Operating pressure for attachments, 20.5 MPa)
205 bar
Hydraulic system
Danfoss variable piston pump, dual pump confluence, load-sensing steering
Mast lowering buffer
Standard lowering buffer on the lift cylinders

Tyres

Front tyres
9.00-20-14PR pneumatic, dual
Rear tyres
9.00-20-14PR pneumatic
Solid tyres
Optional

Service intervals

Transmission box maintenance cycle
2,000 hours
Wet axle maintenance cycle
1,000 hours