Specification sheetIssued 4 November 2026
Cat · dozer
Cat D8
Cat D8 (the renamed D8T: C15, elevated sprocket, build 22A) in Cat's Afr-ME Tier 3-equivalent build (AME excluding Saudi Arabia) - the model Al-Bahar sells as 'D8 - Tier 3'; standard tractor, SU blade, single-shank ripper.
UAEUSAGlobal
- Blade capacity
- 13.47 yd³
- power
- 363 hp
- Operating weight
- 85,980 lb
- Blade width
- 159 in
- Overall length (with blade)
- 25'11"
- Overall length (base machine)
- 15'7"
- Height (to top of cab)
- 11'7"
- Track gauge
- 6'10"
- Width over tracks
- 9'2"
- Blade width
- 159 in
- Blade height
- 68.8 in
- Track length on ground
- 10'6"
- Shoe width
- 24.0 in
12
6
5
1
3
7
8
4
2
Dimensions
- Height (to top of guardrail)
- 11'1"
- Ground clearance
- 24.5 in
- Grouser height (Extreme service)
- 3.3 in
- SU blade (add to basic tractor)
- 55.8 in
- Single-shank ripper (add to basic tractor) (Tip at ground line, shank pin in middle hole)
- 67.9 in
- Drawbar (add to basic tractor)
- 11.6 in
Weight
- Operating weight
- 85,980 lb
- Operating weight (LGP) (With drawbar)
- 82,861 lb
- Shipping weight (10% fuel, with ripper)
- 75,023 lb
- Blade weight (SU, with push arms)
- 10,007 lb
Performance
- Blade capacity (SU blade, ISO 9246; U 11.8 m³, angle 6.1 m³)
- 13.47 yd³
- 10Blade lift height
- 49.1 in
- 9Digging depth
- 22.7 in
- 11Maximum tilt at blade corner
- 22.6 in
- Ground pressure (ISO 16754)
- 88.5 kPa
- Maximum drawbar pull (1.0 forward)
- 144,361 lbf
Ripper
- Ripper maximum penetration (Single shank)
- 44.5 in
- Ripper maximum penetration force (Single shank)
- 28,618 lb
- Ripper weight (single shank)
- 8973 lb
Engine
- Engine model
- Cat C15
- Emissions
- Brazil MAR-1 / UN ECE R96 Stage IIIA (equivalent to U.S. EPA Tier 3 / EU Stage IIIA)
- Net power (At 2,050 rpm, ISO 9249 / SAE J1349)
- 363 hp
- Gross power
- 397 hp
- Displacement
- 927.56 in³
Transmission
- Transmission
- Powershift, 3 forward / 3 reverse (half-step ranges)
- Travel speed, forward (max) (3.0 forward)
- 6.37 mph
- Travel speed, reverse (max) (3.0 reverse)
- 6.42 mph
Undercarriage
- Undercarriage
- Elevated sprocket, 44 sections, 8 bottom rollers
Hydraulics
- Pump flow (Implement pump, 1,850 rpm)
- 68 gal/min
- Max pressure
- 3,481 psi
Service capacities
- Fuel tank
- 164.8 gal
- Cooling system
- 19 gal
- Engine oil, with filter (Engine crankcase)
- 11.4 gal
- Power train
- 54.9 gal
- Final drives (each)
- 3.30 gal
- Hydraulic tank
- 18.2 gal
Service intervals
- Engine oil and filter
- 500 hours
- Power train oil
- 1,000 hours
- Hydraulic oil
- 6,000 hours
- Coolant
- 12,000 hours