Specification sheetIssued 20 November 2026
Cat · wheel loader
Cat 992K
Cat 992K (C32 ACERT, Tier 4 Final / Tier 2-equivalent), standard lift, 10.7 m³ rock bucket on 45/58-R45 tyres - the 992 Al-Bahar sells in the UAE; the newer next-generation Cat 992 is not covered.
UAEUSAGlobal
- Bucket capacity
- 14 yd³
- power
- 814 hp
- Operating weight
- 220,089 lb
- Static tipping load (full turn)
- 116,539 lb
18.6 ft51.6 ft
Dimensions
- Tread width
- 10'8"
- Bucket width
- 15'10"
- Turning radius (outside of bucket)
- 36'5"
- Articulation angle (Estimate: half the 86 degree total steering angle; Cat also rates tipping load articulated 43 degrees)
- 43°est.
Angles
- 11Rack back angle at ground level
- 43°
- 12Rack back angle at carry
- 53°
- 15Rack back angle at max lift
- 65°
- 16Dump angle at max lift
- 50°
Weight
- Operating weight
- 220,089 lb
- Operating weight (with bucket)
- 219,224 lb
Engine
- Engine model
- Cat C32 ACERT
- Emissions
- U.S. EPA Tier 4 Final or Tier 2 equivalent
- Gross power
- 900 hp
- Engine power (ISO 14396)
- 884 hp
- Net power (SAE J1349)
- 814 hp
- Rated speed
- 1,750 rpm
- Max torque
- 3,514 lbf·ft
- Displacement
- 1963.5 in³
- Bore x stroke
- 145 mm x 162 mm
- Cylinders (Estimate: 145 x 162 mm bore x stroke and 32.1 L on this sheet give 12 cylinders (V12))
- 12est.
Performance
- Bucket capacity (Rated; range 10.7-12.3 m³)
- 14 yd³
- Rated payload
- 24 tons
- Static tipping load (full turn)
- 116,539 lb
- Breakout force
- 128,879 lbf
- Top speed
- 15.4 mph
- Total hydraulic cycle time
- 19.3 s
- Static tipping load (straight) (10.7 m3 rock bucket (first column), tipping load at operating weight, straight)
- 137,936 lb
- Bucket capacity range
- 10.7-12.3 m3 (14-16 yd3)
Hydraulics
- Pump flow (Lift/tilt, at 1,850 rpm)
- 254 gal/min
- Max pressure (Lift/tilt relief valve, 31 000 kPa)
- 4,500 psi
- Steering pump flow (At 1,350 rpm)
- 95 gal/min
Transmission
- Transmission
- Cat planetary power shift, 3F/3R
- Total steering angle
- 86°
- Rear axle oscillation
- 10° ±, 8° ± with stops
Tyres
- Tyres (Tyres used for the operating specifications)
- 45/58-R45 L-5, 58 ply
Service capacities
- Fuel tank
- 413 gal
- Cooling system
- 77 gal
- Engine oil, with filter (Engine crankcase)
- 32 gal
- Transmission
- 45 gal
- Differentials and final drives, front
- 95 gal
- Differentials and final drives, rear
- 91 gal
- Hydraulic system, implement
- 86 gal
- Hydraulic system, steering
- 42 gal