Specification sheetIssued 20 November 2026
Cat · wheel loader
Cat 962
Cat 962L (the 962 sold in the Gulf, listed by Al-Bahar), C7.1 engine meeting China Nonroad Stage III / Bharat Stage III (Tier 3-equivalent), standard lift, 3.4 m³ general-purpose pin-on bucket, Michelin 23.5R25 XHA2 L3 tyres. Figures are from Cat's 950L/962L specification brochure as hosted by the Cat dealer GMMCO; the 962M and the newer 962 (14C) are not covered.
UAEGlobal
- Bucket capacity
- 4.4 cu yd
- power
- 252 hp
- Operating weight
- 42,159 lb
- Static tipping load (full turn)
- 25,794 lb
11.3 ft11 ft27.9 ft
9.3 ftDimensions
- Bucket width (3.4 m³ GP bucket, bolt-on edge (2.994 m with teeth and segments))
- 9'7"
- Articulation angle (Estimate: Cat rates the full-turn tipping load at a full 40 degree turn; from GMMCO (Cat dealer) copy of the Cat brochure)
- 40°est.
Weight
- Operating weight (With 3.4 m³ GP bucket, standard counterweight, Michelin 23.5R25 XHA2 L3, roading fenders, secondary steering and sound suppression; same figure on Al-Bahar)
- 42,159 lb
Engine
- Engine model
- Cat C7.1
- Emissions
- China Nonroad Stage III / India Bharat Stage III (equivalent to Tier 3 / Stage IIIA)
- Displacement (Bore 105 mm, stroke 135 mm)
- 428 cu in.
- Gross power (Maximum power, ISO 14396:2002, at 2,000 rpm (metric hp))
- 265 hp
- Net power (Maximum net power, ISO 9249:2007, at 2,000 rpm (metric hp))
- 252 hp
- Max torque (Peak torque, ISO 14396:2002, at 1,400 rpm)
- 774 lb-ft
- Net torque (Maximum net torque, ISO 9249:2007, at 1,400 rpm)
- 726 lb-ft
- Cylinders (Estimate: same Cat C7.1 engine, listed as 6 cylinders on Cat's 120 motor grader sheet)
- 6est.
Performance
- Bucket capacity (General-purpose pin-on bucket, rated; 3.74 m³ at 110% fill)
- 4.4 cu yd
- Bucket capacity range
- 2.7-4.4 m³
- Static tipping load (full turn) (40 deg full turn, with tyre deflection (12 455 kg without))
- 25,794 lb
- Static tipping load (straight) (3.4 m³ GP pin-on bucket with bolt-on edge, with tyre deflection (14 301 kg without))
- 29,874 lb
- Breakout force
- 32,822 lbf
- Top speed (5th gear forward, standard L3 tyres, 787 mm roll radius, empty bucket)
- 24.5 mph
- Hydraulic raise time
- 5.3 s
- Hydraulic dump time
- 1.4 s
- Hydraulic lower time (float down)
- 2.8 s
- Hydraulic total cycle time
- 9.5 s
Transmission
- Transmission
- Cat powershift, 5 forward and 3 reverse speeds
- Forward 1 (Standard vehicle, empty bucket, standard L3 tyres)
- 4.3 mph
- Forward 2
- 7.5 mph
- Forward 3
- 12.0 mph
- Forward 4
- 16.0 mph
- Forward 5
- 24.5 mph
- Reverse 1
- 4.3 mph
- Reverse 2
- 7.5 mph
- Reverse 3
- 16.0 mph
Axles and brakes
- Axles
- Front fixed, rear oscillating +/-13 deg; maximum single-wheel rise and fall 481 mm
- Brakes
- Meet ISO 3450:2011
- Cab protection
- ROPS/FOPS to ISO 3471:2008 and ISO 3449:2005 Level II
Hydraulics
- Pump type
- Variable axial piston
- Pump flow (Maximum implement pump output at 2,340 rpm, 95% volumetric efficiency)
- 64.7 gpm
- Max pressure (Maximum operating pressure, 27 900 kPa)
- 4,047 psi
- Pump flow (3rd/4th function) (Optional 3rd/4th function, maximum)
- 63.4 gpm
- Max pressure (3rd/4th function) (Optional 3rd/4th function, 21 780 kPa)
- 3,159 psi
Tyres
- Tyres (Tyre the height and tyre-related dimensions are based on; other tyres are listed on p.20)
- 23.5R25 Michelin XHA2 L3 radial
Service capacities
- Fuel tank
- 72.6 gal
- Cooling system
- 15.3 gal
- Engine crankcase
- 5.8 gal
- Transmission
- 11.4 gal
- Differentials and final drives, front
- 11.4 gal
- Differentials and final drives, rear
- 11.4 gal
- Hydraulic tank
- 33.0 gal