Specification sheetIssued 20 November 2026
Cat · mini excavator
Cat 308 CR
Cat 308 CR mini hydraulic excavator with fixed (one-piece) boom, current build 08A (Cat C2.8 Turbo, U.S. EPA Tier 4 Final / EU Stage V), from Cat's Specalog AEHQ8518-01 (10-2025) for North America, Chile, Europe, Turkey and ANZP; Al-Bahar (UAE) does not list the 308 CR, so there is no Gulf sheet; cab only; dimensions are for the standard 1820 mm stick without counterweight unless a row says otherwise.
USAGlobal
- digging depth
- 4.108 m
- power
- 51.2 kW (69.0 hp)
- Operating weight
- 9,420 kg
2.54 m6.57 m
2.3 mDimensions
- Tail swing radius, 250 kg counterweight
- 1.585 m
- Tail swing radius, 500 kg counterweight
- 1.626 m
- Overall height (to top of boom), long stick
- 2.26 m
- Boom height, working position with tools
- 2.66 m
- Boom height, working position with tools, long stick
- 3.05 m
- Overall length, 250 kg counterweight
- 6.706 m
- Overall length, 500 kg counterweight
- 6.747 m
- Overall length, long stick
- 6.872 m
Performance
- 1Max digging depth
- 4.108 m
- Max digging depth, long stick
- 4.643 m
- 2Max vertical wall digging depth (Vertical wall, standard stick)
- 2.991 m
- Max vertical wall digging depth, long stick
- 3.404 m
- 3Max reach at ground level
- 6.949 m
- Max reach at ground level, long stick
- 7.46 m
- 4Max digging reach (Maximum reach, standard stick)
- 7.141 m
- Max digging reach, long stick
- 7.637 m
- 5Max digging height
- 6.736 m
- Max digging height, long stick
- 7.039 m
- 6Max dumping height (Maximum dump clearance, standard stick)
- 4.76 m
- Max dumping height, long stick
- 5.072 m
- 7Boom-in reach (Boom in reach, standard stick)
- 3.059 m
- Boom-in reach, long stick
- 3.215 m
- 16Boom swing offset, right (Boom swing right (plan view))
- 0.935 m
- 17Boom swing offset, left (Boom swing left (plan view))
- 0.604 m
- Boom swing, left
- 60°
- Boom swing, right
- 50°
- Bucket digging force
- 62 kN
- Arm digging force (Stick digging force, standard stick)
- 42 kN
- Arm digging force, long stick (Stick digging force, long stick)
- 36 kN
- Swing speed (Machine swing speed)
- 10.6 rpm
Weight
- Operating weight
- 9,420 kg
- Operating weight, cab (minimum)
- 8,505 kg
- Weight increase, counterweight 250 kg
- 250 kg
- Weight increase, counterweight 500 kg
- 500 kg
- Weight increase, long stick
- 66 kg
- Weight increase, steel tracks with pads
- 341 kg
- Weight increase, angle blade
- 222 kg
Engine
- Engine model
- Cat C2.8 Turbo
- Emissions
- U.S. EPA Tier 4 Final / EU Stage V
- Net power (ISO 9249, 80/1269/EEC, at 2,200 rpm)
- 51.2 kW (69.0 hp)
- Gross power (Engine power, ISO 14396)
- 55.4 kW (74.3 hp)
- Bore
- 90 mm
- Stroke
- 110 mm
- Displacement
- 2.8 L
Hydraulics
- Pump flow
- 167 L/min
- Max pressure (Operating pressure, equipment)
- 285 bar
- Operating pressure, travel
- 285 bar
- Operating pressure, swing
- 250 bar
- Auxiliary circuit flow, primary
- 131 L/min
- Auxiliary circuit flow, secondary
- 33 L/min
Travel
- Travel speed (high)
- 5.1 km/h
- Travel speed (low)
- 3.1 km/h
- Max traction force, high speed
- 28 kN
- Max traction force, low speed
- 68 kN
- Ground pressure, minimum weight
- 37.2 kPa
- Ground pressure, maximum weight
- 41.2 kPa
- Gradeability (maximum)
- 30°
Blade
- Blade width (Standard blade)
- 2.3 m
- Blade width, wide blade
- 2.45 m
- Blade height
- 0.431 m
- Blade width, angle blade
- 2.3 m
- Blade height, angle blade
- 0.441 m
- Blade angle, left / right (Angle blade, each side)
- 25°
Boom and stick
- Boom length (One-piece boom)
- 3.4 m
- 21Stick length
- 1.82 m
- Stick length, long stick
- 2.358 m
Service capacities
- Fuel tank
- 147 L
- Cooling system
- 10 L
- Engine oil
- 8.8 L
- Hydraulic tank
- 53 L
- Hydraulic system
- 110 L
- Final drive (each)
- 1 L
Service intervals
- Engine oil and filter (or 12 months)
- 1,000 hours
- Hydraulic oil (maximum)
- 6,000 hours
- Final drive oil (or 12 months)
- 2,000 hours
- Coolant
- 12,000 hours