Specification sheetIssued 20 November 2026
Cat · mini excavator
Cat 304
Cat 304 (next generation, 07A) mini excavator with C1.7 Turbo engine, U.S. EPA Tier 4 Final and EU Stage V, from Cat specalog AEHQ8377-04 (N Am, EU, Aus-NZ). Reach figures are for the standard 1395 mm stick unless a row says long stick.
UAEUSAGlobal
- digging depth
- 126.4 in
- power
- 45.0 hp
- Operating weight
- 9,867 lb
8.3 ft16.2 ft
5.6 ftDimensions
- Tail swing radius, without counterweight
- 47.4 in
- Overall height (to top of boom), long stick
- 75.2 in
- Overall width (Equals the track width)
- 66.9 in
- Stick length, long stick
- 66.7 in
Weight
- Operating weight (Maximum: cab, steel tracks, long stick, extra counterweight, no bucket)
- 9,867 lb
- Operating weight, cab (minimum) (Rubber tracks, operator, full fuel tank, standard stick, straight blade, no bucket, no extra counterweight)
- 8,875 lb
- Operating weight, canopy (minimum) (Same basis as the cab minimum)
- 8,655 lb
- Operating weight, canopy (maximum) (Steel tracks, long stick, extra counterweight, no bucket)
- 9,647 lb
- Weight increase, counterweight
- 496 lb
- Weight increase, long stick
- 66 lb
- Weight increase, steel tracks
- 430 lb
- Weight increase, angle blade
- 243 lb
Performance
- 1Max digging depth (Standard stick)
- 126.4 in
- Max digging depth, long stick
- 138.2 in
- 2Max vertical wall digging depth (Standard stick)
- 94.3 in
- Max vertical wall digging depth, long stick
- 99.8 in
- 3Max reach at ground level (Standard stick)
- 204.7 in
- Max reach at ground level, long stick
- 214.4 in
- 4Max digging reach (Standard stick)
- 209.8 in
- Max digging reach, long stick
- 219.3 in
- 5Max digging height (Standard stick)
- 198.4 in
- Max digging height, long stick
- 201.8 in
- 6Max dumping height (Standard stick (maker: maximum dump clearance))
- 143.5 in
- Max dumping height, long stick
- 147.2 in
- 7Boom-in reach (Standard stick)
- 88.8 in
- Boom-in reach, long stick
- 92.1 in
- Bucket digging force
- 8,588 lbf
- Arm digging force (Standard stick)
- 4,721 lbf
- Arm digging force, long stick
- 4,316 lbf
- Boom swing, left
- 78°
- Boom swing, right
- 50°
- Swing speed
- 9.0 rpm
Engine
- Engine model
- Cat C1.7 Turbo
- Emissions
- U.S. EPA Tier 4 Final and EU Stage V
- Net power (ISO 9249 / 80/1269/EEC at 2,400 rpm)
- 45.0 hp
- Gross power (ISO 14396)
- 48.4 hp
- Bore
- 3.3 in
- Stroke
- 3.9 in
- Displacement
- 101 in3
- Operator sound pressure (ISO 6396:2008)
- 76 dB(A)
- Exterior sound pressure (Average, ISO 6395:2008 (EU Directive 2000/14/EC))
- 97 dB(A)
Hydraulics
- Hydraulic system type
- Load sensing, variable displacement piston pump
- Pump flow (At 2,400 rpm)
- 25 gal/min
- Max pressure (Equipment circuit)
- 3,553 psi
- Operating pressure, travel
- 3,553 psi
- Operating pressure, swing
- 2,611 psi
- Auxiliary circuit flow, primary (Flow and pressure are not combinable)
- 21 gal/min
- Auxiliary circuit pressure, primary
- 3,553 psi
- Auxiliary circuit flow, secondary
- 7.0 gal/min
- Auxiliary circuit pressure, secondary
- 3,553 psi
Undercarriage
- Travel speed (high)
- 3.2 mph
- Travel speed (low)
- 2.2 mph
- Max traction force, high speed
- 4,271 lbf
- Max traction force, low speed
- 7,329 lbf
- Ground pressure, minimum weight
- 28.7 kPa (4.2 psi)
- Ground pressure, maximum weight
- 33.8 kPa (4.9 psi)
- Gradeability (maximum)
- 30°
Blade
- Blade width (Straight blade)
- 66.9 in
- Blade height (Straight blade)
- 14.2 in
- Blade width, angle blade
- 66.9 in
- Blade height, angle blade
- 14.2 in
- Blade angle, left / right (Angle blade, each side)
- 25°
Service capacities
- Fuel tank (Cat product page rounds this to 63 L)
- 17.0 gal
- Cooling system
- 2.9 gal
- Engine oil
- 1.6 gal
- Hydraulic tank
- 14.0 gal
- Hydraulic system
- 17.0 gal