Cat 299D3
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Cat · compact track loader

Cat 299D3

Cat 299D3 compact track loader (not the 299D3 XE) for North America and Europe (Cat C3.8 DIT turbo with DEF, 2,036 mm low-profile bucket, 400 mm tracks, enclosed cab, standard-flow hydraulics) per the D3-series specalog AEHQ8269-04 (08-2022). Dimension numbers are those on the numbered drawing on that sheet; overall length is the length with the bucket on the ground.

USAGlobal

Rated operating capacity
1,580 kg
power
71 kW (95 hp)
Operating weight
5,200 kg
Cat 299D3, side view with dimensions (illustration)2.13 m3.93 m
Cat 299D3, front view (illustration)1.93 m

Performance

Rated operating capacity (35% tipping load)
1,580 kg
Rated operating capacity, 50% tipping load
2,255 kg
Rated operating capacity with counterweight (At 50% tipping load, optional external counterweight)
2,380 kg
Tipping load
4,520 kg
Breakout force, lift cylinder (Converted from the maker figure of 6,162 lb)
2,795 kgf
Breakout force, tilt cylinder
3,298 kgf
Top speed (Two-speed; 8.4 km/h (5.2 mph) one-speed)
13.5 km/h
Lift type
Vertical lift

Weight

Operating weight (With 2,036 mm low-profile bucket, 400 mm tracks, enclosed cab with air conditioning, ride control, full fluids, 75 kg operator)
5,200 kg
Ground pressure (400 mm tracks; 32.2 kPa (4.7 psi) with 450 mm tracks)
36.4 kPa

Engine

Engine model
Cat C3.8 DIT (turbo)
Emissions
U.S. EPA Tier 4 Final and EU Stage V
Displacement
3.8 L
Bore
100 mm
Stroke
120 mm
Gross power (SAE J1995:2014)
73 kW (98 hp)
Net power (ISO 9249 and SAE J1349)
71 kW (95 hp)
Max torque (At 1,500 rpm, SAE J1995; converted from the maker figure of 246 lbf-ft)
334 Nm
Cylinders (Estimate: 100 x 120 mm bore x stroke and 3.8 L on this sheet give 4 cylinders)
4est.

Hydraulics

Pump flow (Standard flow, loader hydraulic flow)
86 L/min
Pump flow (high flow XPS) (Maximum loader hydraulic flow)
121 L/min
Max pressure (Standard flow; loader hydraulic pressure 23,000 kPa)
230 bar
Max pressure (high flow XPS) (Maximum loader hydraulic pressure 28,000 kPa)
280 bar
Hydraulic power, standard flow (Calculated)
33 kW (44 hp)
Hydraulic power, high flow XPS (Calculated)
57 kW (76 hp)
Hydraulic tank
39 L
Hydraulic system, with tank
55 L

Undercarriage

Track width (Steel-embedded rubber track; 450 mm (17.7 in) also available)
0.4 m
Suspension
Torsion suspension, independent torsion axles
Ground contact area (400 mm tracks; 1.58 m2 (2,443 in2) with 450 mm tracks)
1.40 m2
Idlers
Dual-flange front / single-flange rear

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I
Operator sound pressure level (ISO 6396:2008, cooling fan at 70% of maximum speed)
83 dB(A)
Exterior sound power level (ISO 6395:2008)
104 dB(A)

Service capacities

Fuel tank
120 L
Cooling system
16 L
Engine oil (Crankcase)
13 L
DEF tank (Diesel exhaust fluid)
19 L