Specification sheetIssued 4 November 2026
Cat · skid steer loader
Cat 236
Cat 236D3 (current D3 series) for the Africa-Middle East region (Cat C2.2 engine, standard-flow hydraulics) from spec sheet AEHQ8218-03 (05-2025) for S Am, AME, Eurasia and APD-LRC, the sheet linked by Al-Bahar (UAE); the North American/EU Tier 4 Final 236D3 has the larger Cat C3.3B engine and differs.
UAEUSAGlobal
- Rated operating capacity
- 1,820 lb
- power
- 64.9 hp
- Operating weight
- 6,552 lb
- Wheelbase
- 43.5 in
- Length without attachment
- 108.9 in
- Length with standard bucket
- 137.3 in
- Height with operator cab
- 82.0 in
- Operating height
- 156.6 in
- Height to bucket hinge pin
- 122.9 in
- Bucket pin height at carry position
- 7.5 in
- Dump reach at maximum height
- 16.0 in
- Dump height with standard bucket
- 92.9 in
- Ground clearance
- 7.7 in
- Angle of departure
- 26°
- Bumper overhang behind rear axle
- 40.2 in
- Dump angle at maximum height
- 48°
- Width over tyres
- 66.0 in
- Turning radius from centre, machine rear
- 64.5 in
- Turning radius from centre, coupler
- 51.8 in
- Turning radius with standard bucket
- 83.0 in
- Maximum reach with arms parallel to ground
- 53.3 in
- Rollback fully raised at maximum height
- 91°
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Dimensions
- Standard bucket width
- 68 in
Weight
- Operating weight
- 6,552 lb
Performance
- Rated operating capacity
- 1,820 lb
- Rated operating capacity with optional counterweight
- 2,020 lb
- Tipping load
- 3,640 lb
- Tilt breakout force (tilt cylinder)
- 5,003 lb
- Top speed (one speed, forward or reverse)
- 7.5 mph
- Top speed (two-speed option) (forward or reverse)
- 11.4 mph
Engine
- Engine model
- Cat C2.2
- Displacement
- 134 in³
- Bore
- 3.3 in
- Stroke
- 3.9 in
- Gross power (SAE J1995)
- 65.9 hp
- Net power (SAE 1349)
- 64.9 hp
- Net power (ISO 9249)
- 65.6 hp
- Max torque (at 1,800 rpm (SAE J1995))
- 148 lbf-ft
Hydraulics
- Pump flow (standard flow, loader hydraulic flow)
- 20 gal/min
- Max pressure (loader hydraulic pressure, standard flow)
- 23 000 kPa
- Hydraulic power (standard flow, calculated)
- 39 hp
Tyres
- Tyres
- Cat 10 × 16.5
Service capacities
- Fuel tank
- 19.1 gal
- Engine crankcase
- 2.2 gal
- Hydraulic tank
- 10.3 gal
- Hydraulic system, with tank
- 13.2 gal
- Cooling system
- 2.6 gal
- Chain box, each side
- 2.3 gal
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
- Sound level, inside cab (ISO 6396:2008)
- 83 dB(A)
- Sound level, outside cab (2000/14/EC)
- 101 dB(A)
Service intervals
- Engine oil and filter
- 500 hours
- Air filter, primary and secondary
- 500 hours
- Fuel filters
- 500 hours
- Hydraulic oil filter
- 1,000 hours
- Drive chain oil
- 1,000 hours
- Hydraulic oil
- 3,000 hours