Specification sheetIssued 4 November 2026
Cat · motor grader
Cat 160
Cat 160 (non-AWD, build 14A) with the Cat C9 engine emitting equivalent to U.S. EPA Tier 3 / EU Stage IIIA, 3.7 m (12 ft) moldboard, 14.00R24 tyres - the Tier 3 version Cat sells outside the Tier 4/Stage V markets (Al-Bahar lists only the older 160K).
USAGlobal
- Overall length
- 399 in
- Front tyre to rear of machine
- 344 in
- Wheelbase
- 241 in
- Front axle to moldboard
- 100 in
- Tandem axle spacing
- 60.0 in
- Overall height (to top of cab)
- 130 in
- Height to top of exhaust
- 128 in
- Height to top of cylinders
- 119 in
- Height to front axle centre
- 23.5 in
- Ground clearance
- 13.3 in
- Tread width
- 84.0 in
- Width over rear tyres
- 98.0 in
- Width over tyres
- 98.0 in
7
6
5
4
3
1
10
9
2
8
11
12
13
Dimensions
- Overall length, ripper raised (push plate to ripper, retracted)
- 386 in
Weight
- Operating weight
- 43,465 lb
- Base weight
- 37,082 lb
- Maximum gross vehicle weight
- 52,794 lb
Engine
- Engine model
- Cat C9
- Emissions
- Equivalent to U.S. EPA Tier 3 / EU Stage IIIA
- Cylinders
- 6
- Displacement
- 537 in3
- Net power (base power, 1st gear (ISO 9249))
- 213 hp
- Net power, VHP Plus range
- 159-185 kW
- Max torque (VHP Plus, at 1,000 rpm)
- 912 lb-ft
- Rated speed
- 2,000 rpm
Performance
- Top speed (forward)
- 29.5 mph
- Top speed, reverse
- 23.3 mph
- Turning radius (outside front tyres)
- 24 ft 11 in
- Steering range, left/right
- 48°
- Articulation angle, left/right
- 20°
Transmission and hydraulics
- Transmission
- Direct drive, power shift, countershaft; 8 forward / 6 reverse
- Pump flow (variable piston pump, at 2,150 rpm)
- 55.7 gal/min
- Max pressure
- 24 150 kPa
Moldboard and blade range
- Blade width
- 12 ft
- Moldboard height
- 24.0 in
- Moldboard thickness
- 0.87 in
- Arc radius
- 16.3 in
- Throat clearance
- 3.7 in
- Blade pull (base GVW (maximum GVW 14 656 kg))
- 24,494 lb
- Down pressure (base GVW (maximum GVW 13 153 kg))
- 16,936 lb
- Circle centreshift, right
- 28.7 in
- Circle centreshift, left
- 27.4 in
- Moldboard sideshift, right
- 37.4 in
- Moldboard sideshift, left
- 32.3 in
- Maximum blade position angle
- 90°
- Blade tip range, forward
- 40°
- Blade tip range, backward
- 5°
- Max shoulder reach outside tyres, right
- 89.7 in
- Max shoulder reach outside tyres, left
- 82.3 in
- Max lift above ground
- 17.8 in
- Max depth of cut
- 29.5 in
- Ripping depth, maximum
- 16.8 in
Tyres
- Tyres
- 14.00R24 on 10 x 24 multi-piece rims
Service capacities
- Fuel tank
- 110 gal
- Cooling system
- 10.6 gal
- Hydraulic tank
- 16.9 gal
- Engine oil
- 7.9 gal
- Transmission, differential and final drives
- 17.2 gal
- Tandem housing, each
- 21.1 gal
- Circle drive housing
- 1.8 gal
Service intervals
- Coolant
- 12,000 hours