Case TL100EV
Show metric
EquipmentsFinder

Specification sheetIssued 4 November 2026

Case · mini track loader

Case TL100EV

CASE TL100EV electric stand-on mini track loader (102 V lithium-ion battery), from CASE's own North American spec sheet form CCE202606TL100EV (2026); dimension letters are from the drawing on its p.2. Narrow track is the standard machine; wide-track values are separate rows. The sheet gives no engine, so gross/net power and engine torque are omitted.

USAGlobal

EFHGIBDAMNQRS
Side
POT
Front
A
Overall operating height
114.6 in
B
Overall height
56.5 in
C
Rear departure angle
24°
D
Ground clearance
8.7 in
E
Track length on ground
41.9 in
F
Overall length
85.6 in
G
Length with standard bucket
110.1 in
H
Transport length
85 in
I
Reach at maximum dump
22.24 in
J
Dump angle
42°
K
Maximum rollback at full height
90°
L
Maximum rollback at ground
24°
M
Dump height with standard bucket
61 in
N
Height to bucket hinge pin
86.6 in
O
Width over tracks
35 in
P
Track gauge
28 in
Q
Clearance circle radius, rear
53.1 in
R
Clearance circle radius, no bucket
35.9 in
S
Clearance circle radius, standard bucket
60.7 in
T
Bucket width
36 in

Dimensions

Width over tracks, wide track (Wide track option)
40.4 in
Track gauge, wide track (Wide track option)
30.6 in
Bucket width, wide track (42 in bucket)
42 in

Weight

Operating weight
3,886 lb
Operating weight, wide track (6 counterweights (option))
4,133 lb

Performance

Rated operating capacity
989 lb
Rated operating capacity, 50% of tipping load
1,405 lb
Rated operating capacity, wide track (35% of tipping load)
1,034 lb
Rated operating capacity, wide track, 50% of tipping load
1,472 lb
Tipping load
2,810 lb
Tipping load, wide track (Standard bucket)
2,945 lb
Top speed
5 mph
Ground pressure
0.41 kg/cm2 narrow (7 in track), 0.31 kg/cm2 wide (10 in track)

Electric powertrain

Battery capacity, gross
23.5 kWh
Battery capacity, net usable
21.2 kWh
Nominal battery voltage
102 V
Battery chemistry
Lithium ion (CASE Europe: lithium ferrophosphate, LiFePO4)
Implement motor, rated power (Peak 32 kW; internal permanent magnet)
33.5 hp
Traction motors, rated power (each) (2 motors; peak 17.2 kW each)
11.3 hp
Run time
3 to 7 hours depending on application
Charging time, onboard 240 V 0-100%
8 hr (20-80%: 5 hr)

Hydraulics

Pump flow (Standard flow)
13.7 gpm
Max pressure (Implement hydraulics operating pressure)
2,800 psi
Implement pump
Fixed gear, 20 cm3 displacement

Service capacities

Hydraulic system
6.7 gal