Specification sheetIssued 4 November 2026
Bobcat · compact track loader
Bobcat T770
Bobcat Middle East & Africa T770 (Kubota V3800-DI-T-E3 Tier 3 engine, 450 mm rubber tracks, standard bucket) from the Bobcat MEA product page; the dimension letters are those of the drawing on the EMEA spec sheet B4500740-EN (09-17, Stage IV D34 build), whose figures differ slightly.
UAEUSAGlobal
- Rated operating capacity
- 3,567 lb
- power
- 91 hp
- Operating weight
- 10,331 lb
- Operating height
- 13.8 ft
- Height with operator cab
- 6.8 ft
- Angle of departure
- 29°
- Ground clearance
- 0.6 ft
- Ground contact length
- 5.3 ft
- Length without attachment
- 9.5 ft
- Length with standard bucket
- 11.8 ft
- Rollback at ground position
- 30°
- Dump height with standard bucket
- 8.8 ft
- Height to bucket hinge pin
- 11 ft
- Dump reach at maximum height
- 2.9 ft
- Dump angle at maximum height
- 38°
- Rollback fully raised at maximum height
- 97°
- Width with standard bucket
- 6.7 ft
- Turning radius with standard bucket
- 7.3 ft
- Track gauge
- 5.7 ft
- Width over tracks
- 6.5 ft
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
Weight
- Operating weight
- 10,331 lb
- Shipping weight
- 9,561 lb
Performance
- Rated operating capacity (ISO 14397-1)
- 3,567 lb
- Tipping load (ISO 14397-1)
- 10,194 lb
- Lift breakout force (ISO 14397-2)
- 5,657 lbf
- Tilt breakout force (ISO 14397-2)
- 6,345 lbf
- Push force
- 6,715 lbf
- Ground pressure
- 29 kPa
- Top speed (standard)
- 6.6 mph
- Top speed (two-speed option) (high range)
- 10.7 mph
Engine
- Engine model
- Kubota V3800-DI-T-E3
- Emissions
- Tier 3
- Cylinders
- 4
- Displacement
- 1 US gal
- Gross power (at 2,400 rpm (ISO 14396))
- 91 hp
Hydraulics
- Pump flow (standard flow, gear pump)
- 23 US gpm
- Pump flow (high flow) (high-flow option)
- 36.5 US gpm
- Max pressure (system relief at quick couplers)
- 23.8-24.5 MPa
Undercarriage
- Track width (rubber tracks)
- 1.5 ft
Service capacities
- Fuel tank
- 43.8 US gal
- Engine oil, with filter
- 3 US gal
- Hydraulic tank (hydraulic/hydrostatic reservoir)
- 2.6 US gal
- Hydraulic system, with tank
- 9.5 US gal
- Cooling system (without heater; 15.1 L with heater)
- 3.8 US gal
Service intervals
- Engine oil and filter (every 100 h in severe conditions)
- 500 hours
- Fuel filter
- 500 hours
- Hydraulic charge filter
- 500 hours
- Drive motor oil
- 500 hours
- Hydraulic / hydrostatic filter
- 1,000 hours
- Hydraulic oil
- 1,000 hours
- Coolant (or 24 months)
- 1,500 hours