Specification sheetIssued 4 November 2026
Bobcat · skid steer loader
Bobcat S590
Bobcat Middle East & Africa S590 (Kubota V2607-DI-TE3B engine, 10 x 16.5 heavy-duty tyres, standard bucket) from the Bobcat MEA product page; dimension letters from the drawing on the Bobcat EMEA spec sheet for serials AZND 11001-99999 (2024-02-26), whose figures match the MEA page except where noted.
UAEUSAGlobal
- Rated operating capacity
- 2,200 lb
- power
- 66 hp
- Operating weight
- 6,733 lb
- Operating height
- 12.8 ft
- Height with operator cab
- 6.5 ft
- Angle of departure
- 24°
- Ground clearance
- 0.6 ft
- Wheelbase
- 3.5 ft
- Length without attachment
- 8.7 ft
- Length with standard bucket
- 11.1 ft
- Rollback at ground position
- 30°
- Dump height with standard bucket
- 7.6 ft
- Height to bucket hinge pin
- 9.9 ft
- Dump reach at maximum height
- 2.7 ft
- Dump angle at maximum height
- 42°
- Rollback fully raised at maximum height
- 97°
- Width with standard bucket
- 5.7 ft
- Turning radius with standard bucket
- 6.6 ft
- Track width (tread)
- 4.6 ft
- Width over tyres
- 5.4 ft
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
Weight
- Operating weight
- 6,733 lb
- Shipping weight
- 5,975 lb
Performance
- Rated operating capacity (ISO 14397-1)
- 2,200 lb
- Tipping load (ISO 14397-1)
- 4,398 lb
- Lift breakout force (ISO 14397-2)
- 4,539 lbf
- Tilt breakout force (ISO 14397-2)
- 4,356 lbf
- Push force
- 5,322 lbf
- Top speed (standard)
- 7.8 mph
- Top speed (two-speed option) (high range)
- 11.7 mph
Engine
- Engine model
- Kubota V2607-DI-TE3B-BC-I
- Emissions
- Interim Tier 4 (iT4)
- Cylinders
- 4
- Displacement (2600 cm3)
- 0.7 US gal
- Gross power (at 2,700 rpm (SAE J1995))
- 66 hp
- Max torque (at 1,425 rpm (SAE J1995 gross))
- 161 lbf·ft
Hydraulics
- Pump flow (standard flow, gear pump)
- 17.1 US gpm
- Pump flow (high flow) (high-flow option)
- 26.7 US gpm
- Max pressure (system relief at quick couplers)
- 23.8-24.5 MPa
Tyres
- Tyres (standard)
- 10 x 16.5, 10-ply, heavy duty
Service capacities
- Fuel tank
- 24.8 US gal
- Engine oil, with filter
- 2.6 US gal
- Hydraulic tank (hydraulic/hydrostatic reservoir)
- 2 US gal
- Hydraulic system, with tank
- 9.5 US gal
- Cooling system (with heater)
- 3.1 US gal
- Chaincase (transmission chaincase reservoir)
- 8.5 US gal
Service intervals
- Engine oil and filter
- 250 hours
- Fuel filter
- 250 hours
- Hydraulic charge filter (with reservoir breather cap)
- 500 hours
- Hydraulic/hydrostatic filter
- 1,000 hours
- Hydraulic oil
- 1,000 hours
- Chaincase oil
- 1,000 hours
- Coolant
- every 24 months