Specification sheetIssued 20 November 2026
Bobcat · skid steer loader
Bobcat S550
Bobcat Middle East & Africa S550 (Kubota V2607-DI-TE3B-BC-I Interim Tier 4 engine, 10 x 16.5 heavy-duty tyres, standard bucket, radial lift path) from the Bobcat MEA product page; the dimension letters are those of the table and drawing in the Bobcat MEA brochure B4501693-EN (01-22). The Bobcat Europe page now lists a Stage V S550 with other figures (50.7 kW, 2995 kg).
UAEUSAGlobal
- Rated operating capacity
- 894 kg
- power
- 45.5 kW (61.0 hp)
- Operating weight
- 2,841 kg
1.97 m1.08 m3.38 m
1.64 mWeight
- Operating weight
- 2,841 kg
- Shipping weight
- 2,503 kg
Performance
- Rated operating capacity (ISO 14397-1)
- 894 kg
- Tipping load (ISO 14397-1)
- 1,788 kg
- Lift breakout force (ISO 14397-2; 1888 daN)
- 1,926 kgf
- Tilt breakout force (ISO 14397-2; 1814 daN)
- 1,850 kgf
- Push force
- 2,765 kgf
- Lift arm path
- Radial
- Top speed (standard)
- 12.6 km/h
- Top speed (two-speed option) (high range)
- 18.9 km/h
- Raise lift arms
- 3.3 s
- Lower lift arms
- 2.8 s
- Bucket dump
- 2.3 s
- Bucket rollback
- 1.7 s
Engine
- Engine model
- Kubota V2607-DI-TE3B-BC-I
- Emissions
- Interim Tier 4 (iT4)
- Cylinders
- 4
- Displacement
- 2.6 L
- Bore x stroke
- 87 x 110 mm
- Gross power (at 2,700 rpm; 65 hp)
- 49.2 kW (66 hp)
- Max torque (at 1,425 rpm (SAE J1995))
- 201 Nm
- Alternator
- 90 A
- Battery
- 12 V, 700 A cold cranking at -18 C
- Starter
- 12 V, 3.2 kW
- Net power (Estimate: same Kubota V2607 iT4 engine (49.2 kW gross), rated 45.5 kW net on Bobcat's T590 sheet)
- 45.5 kW (61.0 hp)est.
Hydraulics
- Pump flow (standard flow, gear pump)
- 65 L/min
- Pump flow (high flow) (high-flow option)
- 101 L/min
- Max pressure (system relief at quick couplers)
- 23.8-24.5 MPa
- Lift cylinder bore (double-acting)
- 57 mm
- Lift cylinder rod
- 38 mm
- Lift cylinder stroke
- 699 mm
- Tilt cylinder bore (double-acting, cushioned on dump and rollback)
- 70 mm
- Tilt cylinder rod
- 38 mm
- Tilt cylinder stroke
- 331 mm
Tyres
- Tyres (standard)
- 10 x 16.5, 10-ply, heavy duty
Service capacities
- Fuel tank
- 93.7 L
- Engine oil, with filter
- 9.7 L
- Hydraulic tank (hydraulic/hydrostatic reservoir)
- 7.6 L
- Hydraulic system, with tank
- 32.2 L
- Cooling system (without heater; 11.7 L with heater)
- 11.4 L
- Chaincase (transmission chaincase reservoir)
- 32.2 L
Service intervals
- Engine oil and filter (every 100 h in severe conditions)
- 250 hours
- Fuel filter (or 12 months)
- 250 hours
- Hydraulic charge filter (with reservoir breather cap; or 12 months)
- 500 hours
- Hydraulic/hydrostatic filter
- 1,000 hours
- Hydraulic oil
- 1,000 hours
- Chaincase oil
- 1,000 hours
- Engine valve clearance
- 1,000 hours
- Coolant
- every 24 months