Specification sheetIssued 4 November 2026
Bobcat · skid steer loader
Bobcat S450
Bobcat Middle East & Africa S450 (Kubota V2403-MDI-E3 Interim Tier 4 engine, 10x16.5 tyres, standard bucket) from the Bobcat MEA product page; dimension letters from the MEA brochure B4501693-EN (01-22) and the EMEA spec sheet B4500390-EN (09-17), which describe the V2203 Stage IIIA build.
UAEUSAGlobal
- Rated operating capacity
- 1,340 lb
- power
- 48 hp
- Operating weight
- 4,938 lb
- Operating height
- 11.7 ft
- Height with operator cab
- 6.5 ft
- Angle of departure
- 23°
- Ground clearance
- 0.7 ft
- Wheelbase
- 3 ft
- Length without attachment
- 8.2 ft
- Length with standard bucket
- 10.4 ft
- Rollback at ground position
- 26°
- Dump height with standard bucket
- 7.1 ft
- Height to bucket hinge pin
- 9.1 ft
- Dump reach at maximum height
- 1.9 ft
- Dump angle at maximum height
- 40°
- Rollback fully raised at maximum height
- 91°
- Width with standard bucket
- 5.2 ft
- Turning radius with standard bucket
- 6.4 ft
- Tread width
- 4.1 ft
- Width over tyres
- 4.9 ft
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
Weight
- Operating weight
- 4,938 lb
- Shipping weight
- 4,431 lb
Performance
- Rated operating capacity (ISO 14397-1)
- 1,340 lb
- Tipping load (ISO 14397-1)
- 2,679 lb
- Lift breakout force (ISO 14397-2)
- 3,056 lbf
- Tilt breakout force (ISO 14397-2)
- 3,918 lbf
- Push force
- 4,334 lbf
- Top speed (standard)
- 7.1 mph
- Top speed (two-speed option) (high range; low range 10.5 km/h)
- 9.2 mph
Engine
- Engine model
- Kubota V2403-MDI-E3
- Emissions
- Interim Tier 4
- Cylinders
- 4
- Displacement
- 0.6 US gal
- Gross power
- 48 hp
Hydraulics
- Pump flow (gear pump)
- 16.7 US gpm
- Max pressure (system relief at quick couplers)
- 22.4-23.1 MPa
Tyres
- Tyres
- 10 x 16.5, 10-ply, heavy duty
Service capacities
- Fuel tank
- 14.2 US gal
- Engine oil, with filter
- 2.3 US gal
- Hydraulic tank (hydraulic/hydrostatic reservoir)
- 1.4 US gal
- Hydraulic system, with tank
- 5.5 US gal
- Cooling system (without heater; 10.6 L with heater)
- 2.5 US gal
- Chaincase (transmission chaincase reservoir)
- 5.5 US gal
Service intervals
- Engine oil and filter
- 250 hours
- Fuel filters
- 250 hours
- Hydraulic charge filter (with reservoir breather cap)
- 500 hours
- Hydraulic/hydrostatic filter
- 1,000 hours
- Hydraulic oil
- 1,000 hours
- Chaincase oil
- 1,000 hours
- Coolant
- every 24 months